0(0)

Diploma in Mechanics and Auto Electricity

  • Course level: Professional Courses

Description

Program
Section
Hours
Brakes (brake) + car parts
Learning occupational safety and health + Learning equipment.
Mechanics
4
Introductory video about occupational safety and health.
Mechanics
1
Introductory video about brakes + car parts.
Mechanics
1
Removing and installing of the front and rear fenders + maintenance of the comprehensive brake.
Mechanics
4
Turning discs in the lathe section.
Lathe
4
Removing the bras, its budget, installing and changing the bushes.
Mechanics
3
Removing the cards and changing the budget + maintenance of the switchgear.
Mechanics
3
Removing and installing the sides and springs.
Mechanics
4
Removing and installing of the Tire + tire budget machine for tire alignment.
Mechanics
4
Removing and installing of deviations and excels, and changing the Excel ribs.
Mechanics
6
Inspecting the chassis from all directions+ Removing and installing the doors’ machines.
Plumbing
10
Learning on oxygen and mig welding.
Plumbing
5
Learning electrical welding of all kinds.
Blacksmithing and Welding
6
Gearbox
Introductory video about automatic transmission.
Mechanics
2
Removing the transmission from the car
Mechanics
8
Removing all parts of the transmission (Gearbox) with the explanation
Mechanics
10
Knowing the names of the parts in the transmission (Gearbox)
Mechanics
4
Inspecting Transmission electrical
Mechanics
4
Changing the transmission oil and filter
Mechanics
4
Inspecting transmission oil coolant
Mechanics
2
Engine
Introductory video about engine.
Mechanics
2
Removing the engine from the car and check the engine pressure.
Mechanics
8
Removing all parts of  the engine and inspecting for damage.
Mechanics
4
Inspecting the crank, engine head and cylinder on the lathe
Lathe
4
Face work for the engine head + sanding and valve budget
Lathe
10
Changing the timing belt and the tensioner belt
Mechanics
4
Installing the engine and knowing the steps followed + starting the engine
Mechanics
10
Knowing the types of smoke and knowing the causes of each of it
Mechanics
2
Changing Engine oil and filter
Mechanics
2
Car Electricity + Conditioning and Cooling
Introductory video about car electricity + Conditioning and Cooling.
Mechanics
2
Learning the use of a soldering iron + an electric potentiometer and an inspection of resistors + a voltage measurement + a potentiometer.
Electronics
8
Removing and installing the dynamo and starter and its maintenance.
Mechanics
8
Inspecting the electrical connections + fusebux + knowing all the signals of the dishburne.
Mechanics
7
Inspecting the sensors in the car with the inspection device and its maintenance.
Mechanics
4
Changing the compressor for the air conditioning and inspecting for Freon gas leaks.
Mechanics
8
Knowing of all air conditioning ambiances, their maintenance, and gas filling
Mechanics
4
Changing bulbs, electrical repair of doors and wipers
Mechanics
4

What Will I Learn?

  • Knowing the names of consumable parts, inspecting and maintaining it.
  • Knowing car parts malfunctions to avoid accidents.
  • Knowing the malfunctions of the sudden break and its maintenance.
  • Knowing of gearbox maintenance and knowledge of its malfunctions.
  • Knowing when to change gear oil and filter.
  • Knowing to inspect the gearbox before the holidays.
  • Knowing to inspect the engine while it is on the car.
  • Knowing the change of timing belt according to the kilometer.
  • Knowing in case of the engine is turned off suddenly.
  • Maintaining your car electrically, inspect and maintain it before a sudden stop.
  • Knowing the signals resulting from electrical faults, its maintenance, and the methods of inspect it.
  • Knowing of air conditioning maintenance in the car in general.
د.إ11,999