Car Tinsmithing and painting- Advanced

Wishlist Share
Share Course
Page Link
Share On Social Media

About Course

Program
Section
Hours
Identifing occupational health and safety procedures.
Tinsmithing and painting
2
An introductory video on occupational health and safety.
Tinsmithing and painting
2
Learning about the parts of the equipment used in the workshop and how to use them.
Tinsmithing and painting
6
Learning about the use of jacks, methods of placing them, and the location of their installation.
Tinsmithing and painting
5
Learning about the use oxygen and shear.
Tinsmithing and painting
8
Learning about the use the Mig Welding machine
Tinsmithing and painting
6
Learning about the use grender cutting and filtering, and knowing the types of discs used.
Tinsmithing and painting
8
Learning about the use the drill in iron.
Tinsmithing and painting
6
Learning about the completely disassemble the car.
Tinsmithing and painting
5
Learning about the disassemble and install front and rear windshields.
Tinsmithing and painting
5
An introductory video about glass removal and installation
Tinsmithing and painting
2
Learning about plumbing, accident repairs and towing
Tinsmithing and painting
5
All chassis sizes to be checked from all directions.
Tinsmithing and painting
6
An introductory video about plumbing and chassis
Tinsmithing and painting
4
Learning how to clear iron from welding
Tinsmithing and painting
6
An introductory video about paste and dyeing methods
Tinsmithing and painting
2
Learning about sanding putty and the types of sandpaper used
Tinsmithing and painting
8
Learning about spraying the primer and knowing the parts that need to be modified before spraying the dye.
Tinsmithing and painting
6
Learning about combining colors and checking if the dye is compatible.
Tinsmithing and painting
6
Learning about the method of spraying the dye, the method of using the spray gun, and the use of the dyeing furnace.
Tinsmithing and painting
8
Learning about spraying the glossy layer with dye.
Tinsmithing and painting
6
Learning about sanding after dyeing and the method of using the polishing machine for polishing.
Tinsmithing and painting
8
Show More

What Will You Learn?

  • How to disassemble and install auto parts and modify them.
  • Check the chassis and see if there are any accidents and the method of checking the body.
  • How to sand and paint, how to use the spray machine, and how to use welding.

Course Content